Hand held gaming Parts list
This is the list of parts I have used in the Raspberry pi Hand held gaming build Prices are only a rough guide, I will also be updating this list as I go so please don’t buy anything and think its going to be part of the final build.
I will Also try and make a build Log with more details regarding the parts used+
![](https://i1.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/s-l1600-1.jpg?fit=640%2C640&ssl=1)
7 inch Capacitive Touch Screen Display Monitor HD IPS USB For Raspberry Pi
£26
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/external-content.duckduckgo.com_.jpg?resize=254%2C185&ssl=1)
PoweA (model 1428130-01)
£25
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/pi3.jpg?resize=260%2C173&ssl=1)
Raspberry PI 3 B+
£35
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/H2df76fa4c3fa4fdcaea37c4e98cdcefaj.jpg?resize=228%2C228&ssl=1)
18650 Lithium Battery Shield
£6
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/battery.jpg?resize=205%2C205&ssl=1)
Samsung INR18650-25R 2500 mAh
£15
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/audio-amp.jpg?resize=203%2C203&ssl=1)
PAM8403 DC 5V 3W+3W Dual Channel Mini Audio Amplifier
£0.99
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/vol.jpg?resize=244%2C215&ssl=1)
Rotary dial potentiometer with switch 50K
£2.50 (for 5)
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/hdmi.jpg?resize=195%2C195&ssl=1)
FPV HDMI to HDMI Adapter
£6 you only need the 2 ends as the cable is reversed.
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/ffc-cable.jpg?resize=222%2C125&ssl=1)
20 pin 0.5mm pitch forward 15cm
£1.28 for 5
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/wifi.jpg?resize=294%2C294&ssl=1)
1200Mbps USB3.0 Wifi Adapter RTL8812CU IEEE802.11ac Dual Band 5GHz 2.4GHz
£10 ( not recommend)
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/wifi-extention-cable.jpg?resize=270%2C240&ssl=1)
WiFi Antenna RP-SMA Extension (note you just need the female SMA-RP end)
£3
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/hex-stabd-off.jpg?resize=228%2C194&ssl=1)
Hex Standoff Male/Female, 10mm, M3
£8.50 for 50 (you need 8)
![](https://i0.wp.com/warrantyvoid.net/wp-content/uploads/2020/07/ribbon.jpg?resize=320%2C320&ssl=1)
Flat Ribbon Cable
5 meters & £5